Khiwar Al-Qur'an

How to wash a motorcycle 

Like a humans, motorcycle also need to be bathed. The goal is for the motorcycle to be clean, free of dust and dirt. Before entering the review, I will tell you the equipment that needs to be prepared so that the washing process can take place smoothly, there are :

1. Prepare water. Can use a bucket, but it's better if you use tap water with a hose.
2. Spons and soft brush.
3. Cloth.

Motorcycle wash or shampoo specifically wash.

 After everything  isready, let's see how!

• First, spray or flush the motor with clean water evenly.
• Second, prepare water in a bucket and mix it with shampoo or special motor soap, then use a sponge to clean the motor evenly. For stubborn stains like dry mud, stick a wet sponge to the dirt for a few moments to soften, if enough try to rub the dirt off.
• Third, take a brush. If there isn't, you can use a used toothbrush or paint brush. Begin to clean the area of ​​the motor which is located below and in places where there is a lot of dirt.
• Fourth, rinse all parts of the motor using clean water. Can be watered using a dipper, or can also be sprayed using tap water. Make sure the remaining soap has been rinsed thoroughly.
• Fifth, If it is clean, let the motor airing for a while. Then take a rag, wipe all parts of the motor to remove the water spots that are left behind and dry up so that the motorcycle shiny again. If necessary, you can also use tire polish to polish the wheels to make them look shiny black like new.

Thus the text of the procedure on How to Wash a Motorcycle. Hopefully it can help in caring for the motorbike, especially in keeping the motorbike always clean and always in top condition. If all that can be done alone at home, of course it will be more efficient and can be as a means of exercise so as to sweat a little. Hopefully can be usefull